Why is the EZ ONE-SHOT™ Recovery Cylinder different from traditional recovery cylinders? EZ ONE-SHOT™ cylinders use DOT-39 disposable cylinder technology to provide an inexpensive, lightweight cylinder for use in one-time fill recovery situations. One-time fill means that once refrigerant has been put into the cylinder and then removed, the cylinder may no longer be used for further recovery operations. It must be scrapped or disposed of properly. Recovering refrigerant with an EZ ONE-SHOT™ recovery cylinder is considered the first filling operation. Recovery from several units, one after the other, until the cylinder is full represents one filling operation (for example, a dedicated shop machine). EZ ONE-SHOT™ recovery cylinders are subject to the same regulations as the disposable refrigerant cylinder refrigerant is supplied in. Federal law forbids transportation if REFILLED. Federal law also requires that cylinders be filled and transported in the box provided. Penalty up to $500,000 fine and 5 years imprisonment (49 U.S.C. 5124).

Applications for the EZ ONE-SHOT™

• Temporary storage receiver (where policy demands a clean cylinder for each job)
• Single recovery job where gas will need to be returned or stored.
• Dedicated shop machines.
• Download everyday cylinder to return refrigerant. There are many situations in which you will still need your traditional recovery cylinders. The EZ ONE-SHOT™ cylinder will complement,but not replace, your current recovery cylinder program. Applications where EZ ONE-SHOT™ should NOT be used:
• Multiple small jobs at different locations or at different times — back flow prevention valves will not allow additional recovery after the valves have been closed.
• Everyday service (can't be filled more than once).