1. Home/
  2. Retired and Closeouts/
  3. Refrigeration Equipment/
  4. THP222PTT3A
  View Compare ( 0 )
Catalog pricing shown. Please Sign In to see your pricing.

THP222PTT3A

THP222PTT3A
Call To Order
View Inventory
Unit cooler, walk-in, 4 FPI, hot gas defrost, 3-pipe with electric heater, 222000 BTUH +25°F ET, 208-230/3/60 volt, 57-9/32" H x 40-1/2" W x 187" L
Nearby Stock
Regional Add to Job List
Vendor Name:
Trenton Refrigeration Products
URI Part Number:
THP222PTT3A
Length (In.):
187
Width (In.):
40 1/2
Height (In.):
57 9/32
Shipping Weight (Lbs.):
1664
CFM:
36600
Connection Size Inlet (In.):
1 3/8
Connection Suction (In.):
2 5/8
Connection Type:
ODS
Fins/Inch:
4
Heater Amps:
35.4
Heater MCA:
44.2
Heater Watts:
14100
Maximum Fuse / Breaker Size (Amps):
50
Motor FLA:
22.4
Motor Horsepower:
1.5
Motor Maximum Fuse (Amps):
35
Motor MCA:
30.1
Motor Type:
ODP
Number of Motors:
4
Voltage:
208-240/3
Prop65:
WARNING: This product can expose you to chemicals including Lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

Standard Features

  • Heavy gauge textured aluminum cabinet with galvanized steel hangers, support channels and end plates
  • Hinged access panels with removable hinge pins and captive fasteners.
  • Hinged drain pan with removable hinge pins
  • Rugged heavy-gauge galvanized steel rail motor mount / support.
  • Stackable design
  • Schrader fitting and external equalizer line.
  • Factory installed solenoid valve wire harness
  • Unit shipped upright for convenient handling and quick installation.

Optional Features

  • Factory mounted TX valve, solenoid valve and thermostat
  • Throw boosters
  • Insulated drain pan
  • TEFC motors
  • Optional fin spacing
  • Optional fin materials
  • Optional coil coating


Available in sizes from 59,000 to 256,000 BTUH.

  • Adjustable defrost termination thermostat
  • Heater safety thermostat
  • Fixed fan delay thermostat
  • Maximum fuse is for heater circuits only; motor fusing listed separately
    Standard units are equiped with an electric heater (hot gas drain pan loop optional) and are suitable for three pipe or reverse cycle applications.
    Replace (*) with letter code to completely specify required configuration
    T = 3 Pipe with Electric Heater
    G = Reverse Cycle with Electric Heater
Documents