Unit cooler, walk-in, 6 FPI, hot gas defrost, 3-pipe with loop, 216000 BTUH -20°F ET, 460/3/60 volt, 57-9/32" H x 40-1/2" W x 187" L
Motor Freight
Engineered Items
Vendor Name:
Trenton Refrigeration Products
URI Part Number:
THP216LHT4A
Length (In.):
187
Width (In.):
40 1/2
Height (In.):
57 9/32
Shipping Weight (Lbs.):
1664
CFM:
34770
Comments:
3 Pipe w/ Loop
Connection Size Inlet (In.):
1 5/8
Connection Suction (In.):
3 1/8
Connection Type:
ODS
Fins/Inch:
6
Heater MCA:
N/A
Heater Watts:
N/A
Motor FLA:
11.2
Motor MCA:
11.9
Motor Type:
ODP
Number of Motors:
4
Voltage:
460/3
Prop65:
WARNING: This product can expose you to chemicals including Lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Standard Features
Heavy gauge textured aluminum cabinet with galvanized steel hangers, support channels and end plates
Hinged access panels with removable hinge pins and captive fasteners.
Hinged drain pan with removable hinge pins
Rugged heavy-gauge galvanized steel rail motor mount / support.
Stackable design
Schrader fitting and external equalizer line.
Factory installed solenoid valve wire harness
Unit shipped upright for convenient handling and quick installation.
Optional Features
Factory mounted TX valve, solenoid valve and thermostat
Throw boosters
Insulated drain pan
TEFC motors
Optional fin spacing
Optional fin materials
Optional coil coating
Available in sizes from 65,000 to 228,000 BTUH.
Adjustable defrost termination thermostat
Heater safety thermostat (on models with heaters)
Fixed fan delay thermostat Standard units are equiped with either an electric heater or hot gas drain pan loop and are suitable for three pipe or reverse cycle applications Replace (*) with letter code to completely specify required configuration T = 3 Pipe with Electric Heater G = Reverse Cycle with Electric Heater H = 3 Pipe with Loop R = Reverse Cycle with Loop