Catalog pricing shown. Please Sign In to see your pricing.
TZCHC360JK000ADA
TZCHC360JK000ADA
Package A/C unit, heat pump, direct drive, 13 SEER, R410A, 59,000 cooling BTUH, 60,000 heating BTUH 47°F, 208-230/1/60
Motor Freight
Engineered Items
- Vendor Name:
- Thermal Zone
- URI Part Number:
- TZCHC360JK000ADA
- Vendor Part Number:
- TZCHC360JK000ADA
- Length (In.):
- 75 1/2
- Width (In.):
- 46 1/2
- Height (In.):
- 35
- Shipping Weight (Lbs.):
- 580
- CFM:
- 2000
- Cooling Capacity (BTUH):
- 59000
- Cooling Efficiency (EER):
- 11.5
- Cooling Efficiency (SEER):
- 13.0
- Country of Origin:
- US
- Maximum Fuse / Breaker Size (Amps):
- 60
- MCA (Amps):
- 39
- Motor Horsepower:
- 1
- Nominal Tons:
- 5
- Nominal Tons_Sort:
- 5.0
- Refrigerant:
- R410A
- Sound Rating Decibels:
- 83
- Voltage:
- 208-240/1
- One-piece, high efficiency electric heating and electric cooling with a low profile, prewired, tested, and charged at the factory
- All units are convertible from downflow to horizontal air flow; no special adapter curbs are necessary
- Full perimeter base rail with built-in rigging adapters and fork truck slots
- Pre-painted exterior panels and primer-coated interior panels tested to 500 hours salt spray protection
- Fully insulated cabinet
- Scroll compressors with internal line-break overload protection
- All units have high and low pressure switches
- Two inch disposable fiberglass type return air filters in dedicated rack with tool-less filter access door
- Refrigerant circuits contain a liquid line filter drier to trap dirt and moisture
- Precision sized suction line accumulator to provide high reliability
- 4-way reversing valve rapidly changes the flow of refrigerant to quickly changeoverfrom cooling to heating and heating to cooling
- Standard belt drive, constant torque motor with permanently lubricated motors
- Crankcase heaters on all models
- Indoor and outdoor coils constructed of aluminum fins mechanically bonded to seamless copper tubes
- Newly designed indoor refrigerant header for easier maintenance and replacement)
- Exclusive non-corrosive composite condensate pan in accordance with ASHRAE 62 Standard, sloping design; side or center drain
- Access panels with easy grip handles provide quick and easy access to the blower and blower motor, control box, and compressor.
- “No-strip” screw system has superior holding power and guides screws into position while preventing the screw from stripping the unit’s metal.
- Newly designed terminal board facilitates simple safety circuit troubleshooting and simplified control box arrangement
- Outdoor temperature cooling operation range up to 115°F (46°C) and down to 25°F ( -4°C ) using accessory winter start kit
- Fixed orifice metering devices on all models to precisely control refrigerant flow
- Large, laminated control wiring and power wiring drawings are affixed to unit to make troubleshooting easy
- Capable of thru-the-base line routing
- Single point electrical connections
- R-410A HFC refrigerant.
- Complete factory charged, wired and run tested.
- Single stage scroll compressors with internal line break overload and highpressure protection.
- Convertible airflow.
- TXV refrigerant metering system on each circuit.
High Pressure protection standard on all models. Low Pressure/Loss of charge protection standard on 6 ton model. - Solid Core liquid line filter drier on each circuit.
- Single slab, single pass designed copper tube aluminum fin evaporator coil facilitates easy cleaning for maintained high efficiencies.
- Powder Paint Finish meets ASTMB117 steel coated on each side for maximum protection. G90 galvanized.
One piece top cover and one piece base pan with drawn supply and return opening for superior water management. - Forkable base rails for easy handling and lifting.
- Single point electrical connection.
- Direct drive or high performance belt drive motor with variable pitch pulleys and quick adjust belt system. (M and L suffix models are belt drive)
- Permanently lubricated evaporator and condenser motors.
- Condenser motors are internally protected, totally enclosed with shaft down design.
