Package heat pump unit, medium static drive, vertical orientation, 11 IEER, R410A, 172,000 cooling BTUH, 166,000 heating BTUH 47°F, 208-230/3/60
Motor Freight
Engineered Items
Vendor Name:
Arcoaire
URI Part Number:
RHS181H0CA0AAA
Vendor Part Number:
RHS181H0CA0AAA
Length (In.):
127 7/8
Width (In.):
86 3/8
Height (In.):
49 3/8
Shipping Weight (Lbs.):
1775
Cooling Capacity (BTUH):
172000
Cooling Efficiency (EER):
10.8
Country of Origin:
MX
Drive:
Medium Static
Maximum Fuse / Breaker Size (Amps):
90
MCA (Amps):
71.0
Nominal Tons:
15
Nominal Tons_Sort:
15.0
Orientation:
Vertical
Refrigerant:
R410A
Sound Rating Decibels:
84
Voltage:
208-240/3
Prop65:
WARNING: This product can expose you to chemicals including Lead, and Lead compounds, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
One-piece, high efficiency electric heating and electric cooling with a low profile, prewired, tested, and charged at the factory
All units are convertible from downflow to horizontal air flow; no special adapter curbs are necessary
Full perimeter base rail with built-in rigging adapters and fork truck slots
Pre-painted exterior panels and primer-coated interior panels tested to 500 hours salt spray protection
Fully insulated cabinet
Scroll compressors with internal line-break overload protection
All units have high and low pressure switches
Two inch disposable fiberglass type return air filters in dedicated rack with tool-less filter access door
Refrigerant circuits contain a liquid line filter drier to trap dirt and moisture
Precision sized suction line accumulator to provide high reliability
4-way reversing valve rapidly changes the flow of refrigerant to quickly changeoverfrom cooling to heating and heating to cooling
Standard belt drive, constant torque motor with permanently lubricated motors
Crankcase heaters on all models
Indoor and outdoor coils constructed of aluminum fins mechanically bonded to seamless copper tubes
Newly designed indoor refrigerant header for easier maintenance and replacement)
Exclusive non-corrosive composite condensate pan in accordance with ASHRAE 62 Standard, sloping design; side or center drain
Access panels with easy grip handles provide quick and easy access to the blower and blower motor, control box, and compressor.
“No-strip” screw system has superior holding power and guides screws into position while preventing the screw from stripping the unit’s metal.
Newly designed terminal board facilitates simple safety circuit troubleshooting and simplified control box arrangement
Outdoor temperature cooling operation range up to 115°F (46°C) and down to 25°F ( -4°C ) using accessory winter start kit
Fixed orifice metering devices on all models to precisely control refrigerant flow
Large, laminated control wiring and power wiring drawings are affixed to unit to make troubleshooting easy
Capable of thru-the-base line routing
Single point electrical connections
One-piece, high efficiency electric heating and electric cooling with a low profile, prewired, tested, and charged at the factory
Dedicated vertical or horizontal air flow; no field kits required
Full perimeter base rail with built-in rigging adapters and fork truck slots
Pre-painted exterior panels and primer-coated interior panels tested to 500 hours salt spray protection
Fully insulated cabinet
Scroll compressors with internal line-break overload protection
2 stage cooling with independent circuits and control
All units have loss of charge, freeze protection and high pressure switches
Two inch disposable fiberglass type return air filters in dedicated rack with tool-less filter access door
Each refrigeration circuit provided with liquid line filter drier and accumulator
Standard belt drive with various drive options
Indoor and outdoor coils constructed of aluminum fins mechanically bonded to seamless copper tubes
Exclusive non-corrosive composite condensate pan in accordance with ASHRAE 62 Standard, sloping design; end drain
Access panels with easy grip handles provide quick and easy access to the blower and blower motor, control box, and compressor.
"No-strip" screw system has superior holding power and guides screws into position while preventing the screw from stripping the unit's metal.
Newly designed terminal board facilitates simple safety circuit troubleshooting and simplified control box arrangement
Outdoor temperature cooling operation range up to 115°F (46°C) and down to 30°F ( -1°C ) using accessory winter start kit
Fixed orifice metering devices on all models to precisely control refrigerant flow
Large, laminated control wiring and power wiring drawings are affixed to unit to make troubleshooting easy