Log in for pricing and inventory.

RHS072H0AA0AAA

RHS072H0AA0AAA
Call To Order
Package heat pump unit, standard static drive, 11 EER, R410A, 70,000 cooling BTUH, 67,000 heating BTUH 47°F, 208-230/3/60
Vendor Name:
Arcoaire
URI Part Number:
RHS072H0AA0AAA
Length (In.):
74 3/8
Width (In.):
46 3/4
Height (In.):
41 3/8
Shipping Weight (Lbs.):
630.00
Cooling Capacity (BTUH):
70000
Cooling Efficiency (EER):
11.1
Drive:
Standard Static
Maximum Fuse / Breaker Size (Amps):
45
MCA (Amps):
30.5
Motor Horsepower:
1.7
Nominal Tons:
6
Nominal Tons_Sort:
6.0
Refrigerant:
R410A
Sound Rating Decibels:
78
Voltage:
208-240/3
  • One-piece, high efficiency electric heating and electric cooling with a low profile, prewired, tested, and charged at the factory
  • All units are convertible from downflow to horizontal air flow; no special adapter curbs are necessary
  • Full perimeter base rail with built-in rigging adapters and fork truck slots
  • Pre-painted exterior panels and primer-coated interior panels tested to 500 hours salt spray protection
  • Fully insulated cabinet
  • Scroll compressors with internal line-break overload protection
  • All units have high and low pressure switches
  • Two inch disposable fiberglass type return air filters in dedicated rack with tool-less filter access door
  • Refrigerant circuits contain a liquid line filter drier to trap dirt and moisture
  • Precision sized suction line accumulator to provide high reliability
  • 4-way reversing valve rapidly changes the flow of refrigerant to quickly changeoverfrom cooling to heating and heating to cooling
  • Standard belt drive, constant torque motor with permanently lubricated motors
  • Crankcase heaters on all models
  • Indoor and outdoor coils constructed of aluminum fins mechanically bonded to seamless copper tubes
  • Newly designed indoor refrigerant header for easier maintenance and replacement)
  • Exclusive non-corrosive composite condensate pan in accordance with ASHRAE 62 Standard, sloping design; side or center drain
  • Access panels with easy grip handles provide quick and easy access to the blower and blower motor, control box, and compressor.
  • “No-strip” screw system has superior holding power and guides screws into position while preventing the screw from stripping the unit’s metal.
  • Newly designed terminal board facilitates simple safety circuit troubleshooting and simplified control box arrangement
  • Outdoor temperature cooling operation range up to 115°F (46°C) and down to 25°F ( -4°C ) using accessory winter start kit
  • Fixed orifice metering devices on all models to precisely control refrigerant flow
  • Large, laminated control wiring and power wiring drawings are affixed to unit to make troubleshooting easy
  • Capable of thru-the-base line routing
  • Single point electrical connections
  • Single stage cooling on 6 ton models, 2 stage cooling on 7.5 through 12.5 ton.

Warranty

5 year compressor limited warranty
1 year parts limited warranty

Documents

Related Products