Catalog pricing shown. Please Sign In to see your pricing.

LV0092HZCFLEPDCXAT

LV0092HZCFLEPDCXAT
Commercial Water Source Heat Pump, horizontal, R410A, Left Return, 3/4 Ton, 277/1/60
Please note an alternative model exists for this Part Number. Please see the Supersedes tab.
Vendor Name:
Bosch
URI Part Number:
LV0092HZCFLEPDCXAT
Vendor Part Number:
LV0092HZCFLEPDCXAT
Length (In.):
33
Width (In.):
19
Height (In.):
11.5
Shipping Weight (Lbs.):
132.00
CFM:
330
Flow (GPM):
2.5
Heat Exchangers:
Copper
MCA (Amps):
3.6
Motor Type:
PSC
Nominal Tons:
3/4
Orientation:
LE
Refrigerant:
R410A
Voltage:
277/1
Prop65:
WARNING: This product can expose you to chemicals including Lead, and Lead compounds, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

The LV Model comes equipped with a compact cabinet designed to fit most commercial replacement projects. This option-rich, single-stage product offering is available in ? to 6 ton size range and meets or exceeds ASHRAE 90.1 efficiency standards. Outfitted with the latest in compressor, blower motor and heat transfer technologies, this product performs extremely well in both water loop and geothermal applications.

  • Two sided 1” R/A filter rack with 1” MERV-4 filter
  • Unit Protection Module (UPM)
  • Uncoated air coil made of copper tubes and aluminum fins
  • Stainless steel drain pan
  • Removable inlet blower ring
  • R-410A refrigerant; single stage compressor
  • Dual refrigerant freeze sensors - water and air side
  • Copper coaxial heat exchanger
  • Condensate overflow sensor switch
  • Lockout circuit and 50 VA transformer (size 007-042), 75 VA transformer (size 048-070)
  • Duct flange connections for 1.5” supply and 1” return air
  • Floating compressor base
  • Schrader access ports
  • Capillary tube expansion device
  • Galvanized steel cabinet
  • 0.5”, 1.5lbs/ft3 Dual density fiberglass insulation


  • Capacities rated 77°F cooling, 32°F heating
  • Include hanging brackets
  • Come standard with blower systems that are easily reconfigured on the job site.
  • Orientation:
    LE: Left return, end discharge
    LS: Left return, straight discharge
    RE: Right return, end discharge

Supersedes Documents