Catalog pricing shown. Please Sign In to see your pricing.
Arcoaire AC Single Phase Split System Deluxe Single Stg 2 Ton 30k BTU Coil 80Pct Gas Furnace 045 MBH 16.5 SEER2 V1
Arcoaire AC Single Phase Split System Deluxe Single Stg 2 Ton 30k BTU Coil 80Pct Gas Furnace 045 MBH 16.5 SEER2 V1
Kit Includes PVC Ptrap Kit, BIP Gas Cock, Electrical Box, Switch, Receptical & Duplex Cover, 50' Line Set 1/2" Insul, PVC Adapters/Fittings, Whip 6' 1/2" 10GA, No Vent Caps, 2" Plastic Pad, Furnace Leveler, 2H/2C Thermostat, Disconnect
Motor Freight
- Vendor Name:
- Arcoaire
- URI Part Number:
- Arcoaire AC Single Phase Split System Deluxe Single Stg 2 Ton 30k BTU Coil 80Pct Gas Furnace 045 MBH 16.5 SEER2 V1
- Shipping Weight (Lbs.):
- 200
- Energy Star:
- Energy Star 6.1 Compliant: 15.2 SEER2, 12.0 EER2
- Heating Input (BTUH):
- 045 MBH Heat
- Includes:
- H4A6S24AKAWA, N80VSL0451412A, EVM4X30M17A, ACGKIT2
- Nominal Capacity (BTUH):
- 24000
- Cooling Efficiency (EER2):
- 13.5
- Cooling Efficiency (SEER2):
- 16.5
- Heating Efficiency HSPF2:
- A/C is Energy Star 6.1 compliant
- System Indoor Type:
- Gas Furnace
- System Outdoor Type:
- Single Stage
- System Coil Configuration:
- Multi Position Power "V"
- Furnace Efficiency:
- 80
- System Nominal Tons:
- 2.0 Ton
- AHRI System Number:
- 210131829
A/C, Single Phase, Split Gas Furnace Single Stage, Multi Position Power "V" H4A6S/N80VSL/EVM4X
Air Conditioner Condenser
Air Conditioner Condenser
- 80% AFUE
- Flame roll-out sensors standard
- Category I venting
- Blocked vent switch
- Louvered door
- 24 VAC and 115 VAC humidifier terminal
- Electronic air cleaner terminal
- Select sizes approved for twinning, refer to accessory kit listing
- N80ESL - Low NOx units are designed for California installations and can be installed in air quality management districts with a 40ng/J NOx emissions limit
- Cabinet air leakage less than 2.0% at 1.0 in. W.C. and cabinet air leakage less than 1.4% at 0.5 in. W.C. when tested in accordance with ASHRAE standard 193
- Adjustable heating blower OFF delay
- Factory set blower ON delay
- RPJ aluminized steel heat exchanger
- High temperature limit control designed to prevent overheating
- Direct ignition with Silicon Nitride igniter
- One piece prepainted steel cabinet
- In-shot burners
- 33 1/3” (847mm) high, for ease of installation
- Quarter turn knobs for easy door removal and secure attachment
- Factory shipped for natural gas, convertible to propane with accessory kit
- Four position - upflow/downflow/horizontal (left/right) installation
- Three position inducer elbow capability
- Through the casing flue pipe for counterflow applications
- Common venting with other Category I appliances
- Masonry chimney adapter available
- Self diagnostics
- Slide out blower assembly
Gas Furnace
- Hi efficiency VCT Variable Speed Constant Torque Motor
- Dehumidification Feature
- Supports Single & 2 Stage Cooling
- Insulated Blower Compartment
- Four position - up flow/down flow/horizontal installation
- 33-1/3” (847mm) high
- Electronic Air Cleaner & Humidifier terminals
- Factory shipped for natural gas, LP conversion kits available
- Category I venting (Common venting with other Category I appliances)
- Three position inducer elbow capability
- Masonry chimney adapter available
- Through the casing flue pipe for counter flow applications RELIABLE
- RPJ Aluminized steel heat exchanger
- In-shot burners
- Direct ignition on with Silicon Nitride igniter
- Innovative knobs for easy door removal and secure attachment
- Self diagnostics
- Corrosion Resistant Aluminum
- Low Pressure Drop
- TXV metering device factory installed
- Compact design, shorter than A-coils
- Hemmed flanges for safer handling
- Cabinets meet or exceed 2% air leakage codes
- UV knockout
- No delta plate allows easy cleaning
- 30-40% Lighter than “A” Coils
- 80% Fewer Factory Braze Joints vs. “N” Coils
- V Design Reduces Cabinet Sweating
- Helium leak tested @ the factory