Catalog pricing shown. Please Sign In to see your pricing.

Arcoaire AC Single Phase Split System Deluxe Single Stg 2.5 Ton 42k BTU Coil 97Pct Low Nox Furnace 060 MBH 15.2 SEER2 V3

Arcoaire AC Single Phase Split System Deluxe Single Stg 2.5 Ton 42k BTU Coil 97Pct Low Nox Furnace 060 MBH 15.2 SEER2 V3
Kit Includes PVC Ptrap Kit, Drain Pan Float Switch, BIP Gas Cock, Electrical Box, Switch, Receptical & Duplex Cover, Whip, Disconnect, 50' Line Set 1/2" Insul, PVC Adapters/Fittings, No Vent Caps, 2" Plastic Pad, 30x60 Goliath Drain Pan, 2H/2C Thermostat

This retail set contains

Vendor Name:
Arcoaire
URI Part Number:
Arcoaire AC Single Phase Split System Deluxe Single Stg 2.5 Ton 42k BTU Coil 97Pct Low Nox Furnace 060 MBH 15.2 SEER2 V3
Shipping Weight (Lbs.):
200
Energy Star:
Energy Star 6.1 Compliant: 15.2 SEER2, 12.0 EER2
Heating Input (BTUH):
060 MBH Heat
Includes:
H4A6S30AKAWA, F97CMN0602120A, EHD4X42AAL, ACGKIT2H
Nominal Capacity (BTUH):
30000
Cooling Efficiency (EER2):
12.5
Cooling Efficiency (SEER2):
15.2
Heating Efficiency HSPF2:
A/C is Energy Star 6.1 compliant
System Indoor Type:
Low Nox Gas Furnace
System Outdoor Type:
Single Stage
System Coil Configuration:
Horizontal Slab
Furnace Efficiency:
97
System Nominal Tons:
2.5 Ton
AHRI System Number:
207970429
A/C, Single Phase, Split Gas Furnace Single Stage, Horizontal Slab H4A6S/F97CMN/EHD4X

Air Conditioner Condenser
  • 80% AFUE
  • Flame roll-out sensors standard
  • Category I venting
  • Blocked vent switch
  • Louvered door
  • 24 VAC and 115 VAC humidifier terminal
  • Electronic air cleaner terminal
  • Select sizes approved for twinning, refer to accessory kit listing
  • N80ESL - Low NOx units are designed for California installations and can be installed in air quality management districts with a 40ng/J NOx emissions limit
  • Cabinet air leakage less than 2.0% at 1.0 in. W.C. and cabinet air leakage less than 1.4% at 0.5 in. W.C. when tested in accordance with ASHRAE standard 193
  • Adjustable heating blower OFF delay
  • Factory set blower ON delay
  • RPJ aluminized steel heat exchanger
  • High temperature limit control designed to prevent overheating
  • Direct ignition with Silicon Nitride igniter
  • One piece prepainted steel cabinet
  • In-shot burners
  • 33 1/3” (847mm) high, for ease of installation
  • Quarter turn knobs for easy door removal and secure attachment
  • Factory shipped for natural gas, convertible to propane with accessory kit
  • Four position - upflow/downflow/horizontal (left/right) installation
  • Three position inducer elbow capability
  • Through the casing flue pipe for counterflow applications
  • Common venting with other Category I appliances
  • Masonry chimney adapter available
  • Self diagnostics
  • Slide out blower assembly

Gas Furnace

  • ECM blower motor
  • Low NOx units designed for California installations and meet 40 ng/J NOx emissions. Can be installed in air quality management districts with a 40 ng/J NOx emissions requirement.
  • Single stage heating operation
  • First capacity applies to upflow position
  • Second capacity applies to downflow/horizontal positions
  • 24 VAC and 115 VAC humidifier terminal
Evaporator Coil
  • Thermostatic Expansion Valve (TXV)
  • Horizontal bi-directional airflow design
  • Sturdy galvanized steel cabinet
  • Non-ozone-depleting R-410A refrigerant
  • Capacity: 2 - 5 tons
  • Cased horizontal slab coil design for bi-directional airflow
  • Corrosion-resistant all-aluminum coil
  • Fully insulated cabinet
  • Corrosion-free sloped drain pan design helps reduce mold and bacterial buildup