Catalog pricing shown. Please Sign In to see your pricing.

Arcoaire AC Single Phase Split System Deluxe Multi Stg 5 Ton 60k BTU Coil 80Pct Low Nox Gas Furnace 090 MBH 15.2 SEER2 V2

Arcoaire AC Single Phase Split System Deluxe Multi Stg 5 Ton 60k BTU Coil 80Pct Low Nox Gas Furnace 090 MBH 15.2 SEER2 V2
Kit Includes Copper Fittings/Adapters, PVC Ptrap Kit, BIP Gas Cock, Disconnect, 50' Line Set 1/2" Insul, PVC Adapters/Fittings, Electrical Box, Switch, Receptical & Duplex Cover, whip 6' 3/4" 8GA, No Vent Caps, Furnace Leveler, 2" Plastic Pad, 2H/2C Thermostat

This retail set contains

Vendor Name:
Arcoaire
URI Part Number:
Arcoaire AC Single Phase Split System Deluxe Multi Stg 5 Ton 60k BTU Coil 80Pct Low Nox Gas Furnace 090 MBH 15.2 SEER2 V2
Shipping Weight (Lbs.):
200
Energy Star:
Not Energy Star Compliant
Heating Input (BTUH):
090 MBH Heat
Includes:
H4A7T60AKAWA, F80CTL0902120A, EVD4X60M24A, ACGKIT10
Nominal Capacity (BTUH):
60000
Cooling Efficiency (EER2):
11.5
Cooling Efficiency (SEER2):
15.2
System Indoor Type:
Low Nox Gas Furnace
System Outdoor Type:
Multi Stage
System Coil Configuration:
Vertical Power "V"
Furnace Efficiency:
80
System Nominal Tons:
5.0 Ton
AHRI System Number:
210699896
A/C, Single Phase, Split Gas Furnace Multi Stage, Vertical Power "V" H4A7T/F80CTL/EVD4X

Air Conditioner Condenser
  • 2 Stage Copeland Scroll Ultratech Compressor
  • Welded Aluminum Tube / Aluminum Fin Coil
  • Improved Efficiency w/ Multi Directional Internal Enhancements
  • Less Sensitivity to Pressure Drop
  • Heat Shrink Wrap Protects Copper / Aluminum Joints
  • AL/AL w/ Zinc Cladding Provides Enhanced Corrosion Protection
  • Approximately 50% Lighter than Copper Coils
  • Filter Drier Supplied for Field Installation
  • Self Configuring Operation & Text Based Diagnostics w/ Ion Control
  • Compressor Sound Blanket & Isolation Grommets Factory Installed
  • Extended Service Valve to Accommodate Press Fittings
  • High & Low Pressure Switches
  • Outdoor Temp Sensor Factory Installed
  • Factory Charged w/ R410A Refrigerant
  • Long Line Set Capability (refer to spec sheet for details)
  • Low Ambient Cooling Capable w/ Optional Kit
  • Galvanized Steel Cabinet w/ High Gloss, Baked on Powder Coat Paint
  • Corner Posts for Added Cabinet Strength
  • Coated Hail Guard Coil Protection
  • Post Painted (black) Coil
  • Coated Cabinet Screws
  • Internal Pressure Relief Valve & Thermal Overload

Gas Furnace

  • 2 Stage Gas Valve & Inducer Motor
  • High Efficiency Variable Speed Constant CFM Motor
  • Dehumidification Feature
  • Insulated Blower Compartment
  • Supports 2 Stage Cooling
  • Low NOx CA approved
  • Four position - upflow/downflow/horizontal installation
  • 33-1/3” (847mm) high
  • Electronic Air Cleaner & Humidifier terminals
  • Factory shipped for natural gas, with Propane gas conversion kits available
  • Category I venting (Common venting with other Category I appliances)
  • Three position inducer elbow capability
  • Masonry chimney adapter available
  • Through the casing flue pipe for counterblow applications
  • RPJ Aluminized steel heat exchanger
  • In-shot burners
  • Direct ignition with Silicon Nitride Ignitor
  • Innovative knobs for easy door removal and secure attachment
  • Self diagnostics
Evaporator Coil
  • Corrosion Resistant Aluminum
  • Low Pressure Drop
  • TXV metering device factory installed
  • Compact design, shorter than A-coils
  • Hemmed flanges for safer handling
  • Cabinets meet or exceed 2% air leakage codes
  • UV knockout
  • No delta plate allows easy cleaning
  • 30-40% Lighter than “A” Coils
  • 80% Fewer Factory Braze Joints vs. “N” Coils
  • V Design Reduces Cabinet Sweating
  • Helium leak tested @ the factory


Recently Viewed