Extended Service Valve to Accommodate Press Fittings
High & Low Pressure Switches
Outdoor Temp Sensor Factory Installed
Factory Charged w/ R410A Refrigerant
Long Line Set Capability (refer to spec sheet for details)
Low Ambient Cooling Capable w/ Optional Kit
Galvanized Steel Cabinet w/ High Gloss, Baked on Powder Coat Paint
Corner Posts for Added Cabinet Strength
Coated Hail Guard Coil Protection
Post Painted (black) Coil
Coated Cabinet Screws
Internal Pressure Relief Valve & Thermal Overload
Gas Furnace
ECM blower motor
Low NOx units designed for California installations and meet 40 ng/J NOx emissions. Can be installed in air quality management districts with a 40 ng/J NOx emissions requirement.
Single stage heating operation
First capacity applies to upflow position
Second capacity applies to downflow/horizontal positions
24 VAC and 115 VAC humidifier terminal
Evaporator Coil
Corrosion resistant aluminum tube
Bolt-on TXV metering device factory installed on all models (equalizer tube brazed in)
TXV and manifold positioned to the side for easier cleaning
Innovative drain pan design for complete water removal
Two condensate drain connections (Additional two for horizontal installation)
2-piece delta plate for easier removal and cleaning
Cabinet widths match flush with Arcoaire gas furnaces
Hemmed flanges for safer handling
Foil faced insulation
Non-sweat cabinet, even at extreme conditions
Cabinets meet or exceed 2% air leakage codes
Sturdy, 22 gauge, pre-painted steel cabinet
One or two UV light knock-outs provided on cabinet (depending on size)