Catalog pricing shown. Please Sign In to see your pricing.

TZHGM120ZL

Product ID: TZHGM120ZL

Commercial air handler, heat pump, 10 tons, 208-230/460/3/60

Please note an alternative model exists for this Part Number. Please see the Supersedes tab.

Motor Freight

Product Details

Vendor Name:: Thermal Zone
URI Part Number:: TZHGM120ZL
Vendor Part Number:: TZHGM120ZL
Length (In.):: 52
Width (In.):: 52
Height (In.):: 27
Shipping Weight (Lbs.):: 419
CFM:: 4000
Connection Liquid (In.):: 5/8
Connection Suction (In.):: 1 3/8
Cooling Capacity (BTUH):: 120000
Country of Origin:: US
Fans Nominal Motor Horsepower:: 1 1/2
Maximum Fuse / Breaker Size (Amps):: 15
MCA (Amps):: 15
Nominal Tons:: 10
Nominal Tons_Sort:: 10.0
Refrigerant:: R410A
Voltage:: 208-240/3, 460/3
Prop65:: WARNING: Cancer and Reproductive Harm- For more information go to www.P65Warnings.ca.gov

Description

Powder coat painted cabinet. Matching discharge plenums and decorative supply and return air grilles are available (optional) for use when units are to be installed within conditioned space.
Inherently protected motors are mounted inside of insulated cabinet to reduce motor noise. A choice of motor horsepowers and drive combinations are available to allow you to meet specified CFM at various static pressures up to 2" [.498 kPa] ESP.
TXV standard all models.
Two circuit, interlaced row split evaporator coils are constructed with copper tubes and aluminum fins mechanically bonded to the tubes for maximum heat transfer capabilities. All coil assemblies are leak tested up to 450 PSIG [3100 kPa] internal pressure prior to installation into units.
Units may be used with two straight cool condensing units or single circuit manifolded in the field using the copper fittings shipped with each unit. (listed connections are manifolded sizes)
All models are designed for horizontal or vertical application and can be installed in either position as supplied from the factory. Galvanized steel drain pan is suitable for either application
HEAT PUMP The TZHGM 90 and 120 Air Handler is designed for heat pump and air conditioning applications. It has two TXV valves with internal check valves that allow reverse flow to occur, providing superior control during heating and cooling cycles.